SURGICAL LIGHTS MODULE:

 SURGICAL LIGHTS MODULE:

The KORE Surgical Lights Module provides superior performance for all aspects of surgery. You design your mechanical parts, like light head and that light head provide excellent shadow reduction, a high-intensity light pattern and optimal color rendition. Its unique, interface allows the user to fully control the light’s intensity, pattern, position and orientation from the light head.

Appropriate for the vast majority of general and specialized surgical procedures including Micro Surgery, Orthopedics, OB/GYN, Ophthalmology, and Cosmetic Surgery.

PERFORMANCE SPECIFICATIONS:

Electrical Input                                           57V@700mA

Power                                                          45 Watts

Intensity/Lighthead                                   60,000 Lux. at 1 meter

Bulb Type                                                    LED

Number of Bulbs                                       19 Color Temperature                                     4,500°K

Pattern Size                                                5.5" - 10.0" nominal  at 1 meter (14cm - 25cm)

Weight                                                         0.5Kg

Color rendering index                                ≥ 95 Size (OD)                                                   5’’ ·         For single dome we have Deriver and heat sinks…

PHP, Dot Net, SEO, Web Designer [Bumper Opening] >> Send Your Resume at: hr@zmu.in

Electrical product testing jic

PRODUCT TESTING JIC

Overview: We can use testing jic to make electrical testing faster and also to save the power supply, we can use this setup in production.

Importance:

1. To protect the power supply and any load in case of short ckt (i.e. Series

2. We can observe the output voltage and current simultaneously (i.e. Vdc -DC Volt, and Idc – DC Ammeter).Bulb and MCB).

3. In case of higher input voltage AC requirement, we can use boosting transformer at the same moment.

4. This testing jic makes electrical testing process easy.

Assembly Diagram:

The testing jic will look like the below diagram after assembling.

35W LED DRIVER THD < 10percent

Specifications

Item Name: LED DRIVER

Input: 90 to 300 VAC ; 47 - 53 Hz, L N E

Output: WITH POWER FACTOR CORRECTION

50V@0.7A

Power factor & THD: 0.99 & 8-10%

Line and Load Regulation:1 %

Output Ripple: 1 %,

Operating Temperature:-10 to 50 deg C ; RH 95 % non condensing

Output Isolation: 1.5 KV rms @ 50 Hz for 1 minute.

Other Features: • Output over voltage protection • Input EMI-RFI filters

• Output LED indication • Integrated MOSFET and PFcontrollers

for greater reliability and space saving

Efficiency:>85 % at full load and normal I/P

Stand by power:<100mW

Output variation: Apprx. ±1%

IF U WOULD LIKE TO DESIGN THIS PRODUCT THAN CALL ME :9716933131

OR MAIL ME:kaushal.talk@gmail.com

260W battery charger solution low cost

Specifications
Of
13.5Volt@20Amp.

Input: 170 to 300 VAC ; 47 - 53 Hz, L N E
Output: 13.5V@20A
function:
INPUT UNDER VOLTAGE CUT OFF AT 145VAC
OVER VOLTAGE SHUT DOWN AT 310VAC
BATTERY REVERSE PROTECTION
Line and Load Regulation: 1 %
Output Ripple: 1 %,
Operating Temperature: 10 to 50 deg C ; RH 95 % non condensing
Output Isolation: 1.8 KV rms @ 50 Hz for 1 minute.
Other Features: Output short circuit protection • Input EMI-RFI filters •
• Integrated MOSFET and PWM controllers for greater reliability and space saving.;

IF U WOULD LIKE TO DESIGN THIS PRODUCT THAN CALL ME :+919716933131

OR MAIL ME:kaushal.talk@gmail.com

POWER SUPPLY UNIT 5V @10AMP.

Specifications

Of

Item Name: SMPS 5V @ 10A

Input: 170 to 265 VAC ; 47 - 53 Hz, L N E

Output: 5 V @ 10A

Line and Load Regulation: 1 %

Output Ripple: 1 %,

Operating Temperature: -10 to 50 deg C ; RH 95 % non condensing

Output Isolation: 1.5 KV rms @ 50 Hz for 1 minute.

Other Features: Input over voltage latch protection • Output over voltage latch protection

• Output short circuit protection • Input EMI-RFI filters

• Screw type input / output connectors 2+2 • Output LED indication

• Integrated MOSFET and PWM controllers for greater reliability and space saving

Efficiency: >77 % at full load and normal I/P

Stand by power: <3.6W

Output variation: Apprx. ±5% through preset.

IF U WANT TO DESIGN THIS PRODUCT THAN CALL ME :+919716933131

OR MAIL ME:kaushal.talk@gmail.com

260 WATT BATTERY CHARGER SOLUTION:

Specifications
Of
13.5Volt@20Amp.

Input: 170 to 300 VAC ; 47 - 53 Hz, L N E
Output: 13.5V@20A
function:
INPUT UNDER VOLTAGE CUT OFF AT 145VAC
OVER VOLTAGE SHUT DOWN AT 310VAC
BATTERY REVERSE PROTECTION
Line and Load Regulation: 1 %
Output Ripple: 1 %,
Operating Temperature: 10 to 50 deg C ; RH 95 % non condensing
Output Isolation: 1.8 KV rms @ 50 Hz for 1 minute.
Other Features: Output short circuit protection • Input EMI-RFI filters •
• Integrated MOSFET and PWM controllers for greater reliability and space saving.;

IF U WOULD LIKE TO DESIGN THIS PRODUCT THAN CALL ME :+919716933131

OR MAIL ME:kaushal.talk@gmail.com